NACHI Cojinetes De Bola De Contacto Angular
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.
Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.
Small contact angle type has higher permissible speed capability. This bearing type is generally used in adjacent positions.
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.
These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep Groove ball bearings.
Standard cage materials may be pressed steel, high- strength brass, or polyamide. Cage materials is dependant on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TO-FACE(DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
- 55 mm x 90 mm x 18 mm NACHI 7011CDT Cojinetes De Bola De Contacto Angular
- 49,2 mm
- 55 mm x 90 mm x 18 mm
- 90 mm x 160 mm x 30 mm NACHI 7218BDT Cojinetes De Bola De Contacto Angular
- 49.7 mm
- Cylindrical Bore
- 60 mm x 95 mm x 18 mm NACHI 7012CDT Cojinetes De Bola De Contacto Angular
- 116 mm
- S71922 CB/P4A
- 35 mm x 72 mm x 17 mm NACHI 7207BDF Cojinetes De Bola De Contacto Angular
- 35 mm x 72 mm x 17 mm
- 66,675 mm
- 150 mm x 270 mm x 45 mm NACHI 7230CDF Cojinetes De Bola De Contacto Angular
- 6 700 r/min
- 101 kN
- 140 mm x 250 mm x 42 mm NACHI 7228BDF Cojinetes De Bola De Contacto Angular
- SCHAEFFLER GROUP
- 420 mm